• What are the differences between plastic caps and Injection caps

    Production process of injection molding bottle cap: the suction machine sucks the mixed materials into the barrel of injection molding machine, heats the barrel to the melting and plasticizing state, injects them into the mold cavity, cools and molds...

  • The difference between pp bottle cap and pe bottle cap

    PP has good heat resistance, and can be sterilized and sterilized at a temperature above 100 ℃. It will not be deformed at 150 ℃ under the condition of no external force. The embrittlement temperature is -35 ℃, and embrittlement will occur below -35 ...

  • How are beverage bottles made?

    Hello! It is produced by the following molds: all kinds of tools and products used in daily production and life, ranging from the base and body shell of machine tools to the shell of a head screw, button and various household appliances, all of which...

  • There are several actions in the whole cycle of injection molding of plastic cap production

    (1) Measurement: in order to form a certain size of plastic parts, a certain amount of granular plastic must be used, which requires measurement. (2) Plasticization: in order to fill the mold cavity with plastic, it is necessary to make it melt and f...

  • The method of checking the side of plastic bottle cap with rota lung line

    The method of checking the side of plastic bottle cap with rota lung line The detection algorithm is different according to different experimental environment conditions. If the height of bottle is stable relative to the camera, then in each captured...

  • How to produce mineral water bottle cap and how to use it?

    Mineral water is a kind of drinking product in our life, which can be used to supplement water. So have you ever noticed the top cap and know how it is produced and used? Bottle cap injection production process sharing 1. The injection lid needs to h...

  • What are the sealing standards for beverage bottle caps and what is the correct way to open them?

    The beverage bottle cap is a kind of sealing material. Its main function is to keep the beverage in the bottle well without volatilization, leakage and other problems. Therefore, all ex factory products will go through a sealing test index, and can o...

  • What is the production process of plastic aseptic bottle cap

    There are many plastic products we contact in our life. The bottle cap makes us most familiar. The bottle cap is fastened on the bottle mouth through the cooperation with the bottle mouth. It is to prevent the leakage of substances in the bottle and ...