While creating high-quality plastic bottle caps in the plastics industry, how to achieve a certain degree of resonance with environmental protection requirements is very important. The plastics industry occupies a lot in the entire market industry. P...
One, rotating deep thread 1. During the injection molding process, there is a rotating equipment system in the mold. This action can effectively maintain the integrity of the cap screw. Therefore, the thread shape of the bottle cap can be effectively...
In the process of plastic injection molding, temperature control is extremely important. It will not only affect the quality of the product but also its molding cycle. Different plastics have different fluidity, so their temperature control is also d...
(1) Multi-cavity point: mature technology from 4 cavity to 32 cavity. Simplified hot runner works reliably and has low cost. (2) High efficiency: using simplified glue dispensing hot runner, no glue port waste, and the cycle time can reach 5 seconds....
Plastic bottle recycling is usually collected by people in the community, but the price will be lower. If you have a large quantity, you can go to a special waste collection station and talk to others. The price varies from region to region. Moreover...
Let me introduce some materials and precautions for use of plastic beverage bottles. Plastic beverage bottles are made of polyester (PET), polyethylene (PE), polypropylene (PP) as raw materials, and after adding corresponding organic solvents, after ...
Everyone is concerned about the hygiene of plastic bottles, especially the bottle caps, because the caps are often in direct contact with our mouths when drinking. If there is something unclean on the caps, it may be drinking. It may be brought into ...
Microwave ovens usually have high calories and are heated by microwave ovens. If the food and beverage bottles are placed directly in the microwave oven, they will easily be melted due to the high temperature. But some food and beverage bottles are m...
Product
Contact us
