• The importance of plastic bottle cap temperature control

    In the process of plastic injection molding, temperature control is extremely important. It will not only affect the quality of the product but also its molding cycle. Different plastics have different fluidity, so their temperature control is also d...

  • Features of plastic bottle cap mould

    (1) Multi-cavity point: mature technology from 4 cavity to 32 cavity. Simplified hot runner works reliably and has low cost. (2) High efficiency: using simplified glue dispensing hot runner, no glue port waste, and the cycle time can reach 5 seconds....

  • What is the price of plastic bottle recycling? The use of plastic bottle recycling

    Plastic bottle recycling is usually collected by people in the community, but the price will be lower. If you have a large quantity, you can go to a special waste collection station and talk to others. The price varies from region to region. Moreover...

  • The material of plastic beverage bottles and precautions for use

    Let me introduce some materials and precautions for use of plastic beverage bottles. Plastic beverage bottles are made of polyester (PET), polyethylene (PE), polypropylene (PP) as raw materials, and after adding corresponding organic solvents, after ...

  • Sterilization of plastic bottle caps

    Everyone is concerned about the hygiene of plastic bottles, especially the bottle caps, because the caps are often in direct contact with our mouths when drinking. If there is something unclean on the caps, it may be drinking. It may be brought into ...

  • Can the beverage bottle be heated in the microwave?

    Microwave ovens usually have high calories and are heated by microwave ovens. If the food and beverage bottles are placed directly in the microwave oven, they will easily be melted due to the high temperature. But some food and beverage bottles are m...

  • Techniques to improve the heat resistance of preforms

    Plastic preform The technique of heat resistance, in the process of producing plastic bottles, the process control of the preform is very strict. If you want to make the bottle of good quality, you must improve its heat resistance, mainly based on th...

  • Problems that should be paid attention to during packaging and processing of plastic bottles

    There are many problems in the packaging and processing of plastic bottles that need to be paid attention to. The following points are summarized below, and I hope to help you.           1. When designing extruded plastics, if the material is high-de...