• Production technology of plastic bottle cap

    Generally speaking, the production process of plastic bottle cap can be divided into two types: the production process of pressing plastic cap and the production process of injection molding cap Production process of the press plastic cover: the suct...

  • Plastic bottle cap factory tells you the common materials for making bottle caps

    Plastic bottle cap factory tells you the common materials for making bottle caps According to the raw materials of bottle cap: It can be divided into PE cover and PP cover; PE (polyethylene): density is 0.94-0.96g/cm3, processing temperature is about...

  • What are the differences between plastic caps and Injection caps

    Production process of injection molding bottle cap: the suction machine sucks the mixed materials into the barrel of injection molding machine, heats the barrel to the melting and plasticizing state, injects them into the mold cavity, cools and molds...

  • The difference between pp bottle cap and pe bottle cap

    PP has good heat resistance, and can be sterilized and sterilized at a temperature above 100 ℃. It will not be deformed at 150 ℃ under the condition of no external force. The embrittlement temperature is -35 ℃, and embrittlement will occur below -35 ...

  • How are beverage bottles made?

    Hello! It is produced by the following molds: all kinds of tools and products used in daily production and life, ranging from the base and body shell of machine tools to the shell of a head screw, button and various household appliances, all of which...

  • There are several actions in the whole cycle of injection molding of plastic cap production

    (1) Measurement: in order to form a certain size of plastic parts, a certain amount of granular plastic must be used, which requires measurement. (2) Plasticization: in order to fill the mold cavity with plastic, it is necessary to make it melt and f...

  • The method of checking the side of plastic bottle cap with rota lung line

    The method of checking the side of plastic bottle cap with rota lung line The detection algorithm is different according to different experimental environment conditions. If the height of bottle is stable relative to the camera, then in each captured...

  • How to produce mineral water bottle cap and how to use it?

    Mineral water is a kind of drinking product in our life, which can be used to supplement water. So have you ever noticed the top cap and know how it is produced and used? Bottle cap injection production process sharing 1. The injection lid needs to h...